Top Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

I have a Rem. 870 12 gauge and I put a slug barel on it with a scope mounted on a cantilever mount. My problem is that when shoo

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • I have a Rem. 870 12 gauge and I put a slug barel on it with a scope mounted on a cantilever mount. My problem is that when shoo

    I have a Rem. 870 12 gauge and I put a slug barel on it with a scope mounted on a cantilever mount. My problem is that when shooting through the scope, I can't see through it when my cheek is on the stock. I have to raise my head up and it causes huge variations in my accuracy. Is there something I can do to raise the stock of the gun without changing the stock or screwing holes into it? I don't want to ruin the wood.

  • #2
    They have pads you can put over the stock of the gun. They come in all different sizes =].

    Comment


    • #3
      Yes, there is something you can do without altering the stock. There are cheek rests that you can tie on, strap-on or velcro around your stock. Check out Midway USA or Brownells. These cheek rests should get your eye lined up with the scope without having to lift your head up off the stock.

      Comment


      • #4
        Cabelas has them also, leather ones that tie on the bottom.

        Comment

        Welcome!

        Collapse

        Welcome to Outdoor Life's Answers section. Here you will find hunting, fishing, and survival tips from the editors of Outdoor Life, as well as recommendations from readers like yourself.

        If this is your first visit, be sure to check out the FAQ for information on posting and navigating the forums.

        And don't forget to check out the latest reviews on guns and outdoor gear on outdoorlife.com.

        Right Rail 1 Ad

        Collapse

        Top Active Users

        Collapse

        There are no top active users.

        Right Rail 2 Ad

        Collapse

        Latest Topics

        Collapse

        • .22 ammo “test”
          by fitch270
          We talked about this the other day, after shooting our match tonight I took a few minutes to try out 4 of the ammo makes we’ve been using the past couple...
          Yesterday, 09:49 PM
        • A small set backmade
          by fitch270
          This is why I try not to get ahead of myself.

          Set up my .22-250 seating die and made up a dummy round to get the COL right. Proceeded to...
          Yesterday, 06:20 PM
        • Ammo shortage over?
          by dewman
          Stopped off at my favorite gun shop this morning. His shelves were full of ammo, powder. Remington, winchester, federal, CCI, Aguilar, all the .22's were...
          01-21-2021, 12:14 PM
        • More reloading stuff
          by fitch270



          Rather than hijack RA’s reloading thread I thought I’d continue my progress separately. Pretty sure we can keep both running....
          01-18-2021, 11:19 PM
        • 17hm2 fail part 3 CCI response
          by dewman
          Been in email contact with technical service rep Cody B. through out the day . They are sending me UPS to pick up ammo and take it to them. Will reimburse...
          01-18-2021, 07:12 PM

        Right Rail 3 Ad

        Collapse

        Footer Ad Widget

        Collapse
        Working...
        X