Top Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

Reloading is becoming more and more important with rising prices. I noticed that bullets without the cannula, or the ribbed part

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Reloading is becoming more and more important with rising prices. I noticed that bullets without the cannula, or the ribbed part

    Reloading is becoming more and more important with rising prices. I noticed that bullets without the cannula, or the ribbed part for crimping, are much cheaper. Question is, how is it for crimping, especially on some of those magnum rounds I shoot like .454? What does the brass grab onto to avoid "Crimp Creep?" Any tips on these bullets is much appreciated.

  • #2
    You can crimp it tight enough with a Lee factory crimp die so that the case neck actually bites into the copper jacket. However, I would stick with bullets with a cannelure for crimping. The extra cost is worth it for your hunting rounds at least.

    Comment


    • #3
      If you have good brass I do not think you would need to crimp. Try loading one without crimping and check how much tension it has.

      Comment


      • #4
        What can happen when not crimping heavy revolver loads is that recoil will back the bullets out to a point one or more are sticking out past the front of the cylinder. At that point your cylinder is effectivley locked from rotating. Once locked you can't get it unloaded either.

        Comment


        • #5
          Measure the inside diameter of your brass after sizing and you should have about .002" bullet grip. One of the crimp dies should hold a bullet without a cannelure. There is a factory crimp die, a roll crimp die and a tapper crimp die. The roll crimp should do the trick. I use mostly lead bullets now so the crimp is not a issue.

          Comment

          Welcome!

          Collapse

          Welcome to Outdoor Life's Answers section. Here you will find hunting, fishing, and survival tips from the editors of Outdoor Life, as well as recommendations from readers like yourself.

          If this is your first visit, be sure to check out the FAQ for information on posting and navigating the forums.

          And don't forget to check out the latest reviews on guns and outdoor gear on outdoorlife.com.

          Right Rail 1 Ad

          Collapse

          Top Active Users

          Collapse

          There are no top active users.

          Right Rail 2 Ad

          Collapse

          Latest Topics

          Collapse

          • Squirrels open early this year.
            by dewman
            In years past, squirrel & stream bass has always been the Saturday of Memorial Day weekend. This year it's the 22nd. A pal and I are hitting up the...
            05-13-2021, 02:08 PM
          • Thinking of trading for a .243 WSSM...
            by PigHunter
            One of my friends is wanting to trade a Winchester Model 70 stainless in .243 WSSM for my Remington 7400 carbine in .30-06. The Model 70 would be without...
            05-10-2021, 12:40 AM
          • Neighbor painted me a picture!
            by dewman
            My neighbor is a regionally known artist. So over time after regaling him with childhood hunting stories of my younger years in Michigan, South Dakota,...
            05-03-2021, 03:35 PM
          • What would you do?
            by fitch270
            About 15 minutes after daybreak my daughter nudges me in the side. I’ve been letting out some soft yelps and clucks but the turkeys are quiet early...
            05-01-2021, 09:34 PM
          • Holy flock 2
            by fitch270
            First a question, then why it matters.


            A group of bears is called what?


            Times up: The answer is

            ...
            05-01-2021, 08:49 PM

          Right Rail 3 Ad

          Collapse

          Footer Ad Widget

          Collapse
          Working...
          X