Top Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

About 18 years ago I had a local gunsmith give and article about the 22CHeetah. I had a Shilen barrel on a Mauser action chambe

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • About 18 years ago I had a local gunsmith give and article about the 22CHeetah. I had a Shilen barrel on a Mauser action chambe

    About 18 years ago I had a local gunsmith give and article about the 22CHeetah. I had a Shilen barrel on a Mauser action chambered to the 22 CHeetah Mk II. I have since lost the artical that the gunsmith used to sell me on the cartridge and he has since retired and moved. I have searched high and low looking for this article that talked as how to take your 308 brass, neck it down, turn the O.D of the neck and loads for the CHeetah. Do you know where I can either find or buy this article? I have Jim's article titled "Faster than the Swift" but I don't believe that this is the same article that I am looking for, because it doesn't talk about the down side of using URBR brass for .243's or bushing from Tin Cup supply to adapt large pocket primers to a small rile primer. Thanks Jim

Welcome!

Collapse

Welcome to Outdoor Life's Answers section. Here you will find hunting, fishing, and survival tips from the editors of Outdoor Life, as well as recommendations from readers like yourself.

If this is your first visit, be sure to check out the FAQ for information on posting and navigating the forums.

And don't forget to check out the latest reviews on guns and outdoor gear on outdoorlife.com.

Right Rail 1 Ad

Collapse

Top Active Users

Collapse

There are no top active users.

Right Rail 2 Ad

Collapse

Latest Topics

Collapse

  • .22 ammo “test”
    by fitch270
    We talked about this the other day, after shooting our match tonight I took a few minutes to try out 4 of the ammo makes we’ve been using the past couple...
    Yesterday, 09:49 PM
  • A small set backmade
    by fitch270
    This is why I try not to get ahead of myself.

    Set up my .22-250 seating die and made up a dummy round to get the COL right. Proceeded to...
    Yesterday, 06:20 PM
  • Ammo shortage over?
    by dewman
    Stopped off at my favorite gun shop this morning. His shelves were full of ammo, powder. Remington, winchester, federal, CCI, Aguilar, all the .22's were...
    01-21-2021, 12:14 PM
  • More reloading stuff
    by fitch270



    Rather than hijack RA’s reloading thread I thought I’d continue my progress separately. Pretty sure we can keep both running....
    01-18-2021, 11:19 PM
  • 17hm2 fail part 3 CCI response
    by dewman
    Been in email contact with technical service rep Cody B. through out the day . They are sending me UPS to pick up ammo and take it to them. Will reimburse...
    01-18-2021, 07:12 PM

Right Rail 3 Ad

Collapse

Footer Ad Widget

Collapse
Working...
X