Top Ad Widget

Collapse

Announcement

Collapse
No announcement yet.

I recently purchased a scope mounting kit to improve my shooting accuracy. The instructional DVD says to level the scope to the

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • John B. Snow
    replied
    To properly align the reticle in your scope with a rifle you need only one small bubble level with a flat bottom surface and a bench vice with padded jaws to grip the barrel. The first step is to affix your bases to the receiver. Place the bubble level on the flat surface on the base and rotate the gun until it is level from side to side and tighten down the vice.

    Once you have the scope in the rings and on the rifle use the same bubble level on the elevation turret, preferably with the cap off. Do this with the rings semi-tight so you can rotate the scope into level by hand with moderate resistance. This will put your crosshairs dead even with the rifle and because you’re using the scope bases it works with any receiver profile or rifle configuration.

    Leave a comment:


  • land_cruiser_73
    replied
    A trick for those of us too cheap to buy a boresight is to remove the bolt and use a small (air rifle) scope to look through the barrel. This will show you very accuratly(sp?) where the gun is pointing. Align the scope to the same point and you will be on paper at 25 yds.

    Leave a comment:


  • Live4Bowhunting
    replied
    One way that I have leveled the scopes on this type of rifles was to position the gun in my cleaning box and plumb the rifle without the scope in the rings and then very carefully install the scope and then place the level on top of the scope and lock the rings down. Take care SeaBee, EO1SCW Ret.

    Leave a comment:


  • Cgull
    replied
    I sometimes level the butt of the stock. Some have a vertical line running through the middle of the butt pad, this can be leveled straight up and down meaning the rifle will be level. Even eye balling the rifle can get you very close to level. I can usually tell if the scope is canted one way or another.

    Leave a comment:


  • I recently purchased a scope mounting kit to improve my shooting accuracy. The instructional DVD says to level the scope to the

    I recently purchased a scope mounting kit to improve my shooting accuracy. The instructional DVD says to level the scope to the gun using a level in the bolt raceway and one on the top scope turret cap. This works fine on some of my guns but how do you level a scope on guns without that bolt raceway, such as my Knight KP1?

Welcome!

Collapse

Welcome to Outdoor Life's Answers section. Here you will find hunting, fishing, and survival tips from the editors of Outdoor Life, as well as recommendations from readers like yourself.

If this is your first visit, be sure to check out the FAQ for information on posting and navigating the forums.

And don't forget to check out the latest reviews on guns and outdoor gear on outdoorlife.com.

Right Rail 1 Ad

Collapse

Top Active Users

Collapse

There are no top active users.

Right Rail 2 Ad

Collapse

Latest Topics

Collapse

  • Dads gun #2 Browning auto5 20ga
    by dewman
    Last time it was shot was a pheasant hunt in Colorado in '84. I'll have to remedy that. This gun is feather light. Wish the choke was ic or mod. It's...
    Yesterday, 08:40 AM
  • Dads gun #1 S&W 28-2. .357
    by dewman
    Got my fathers 28-2 357 to go with my 29-2 44mag. Check out the safari land flap holster. ...
    Yesterday, 07:59 AM
  • What is taking so long ?
    by jhjimbo
    Can't be that hard for the Administrator to 86 the spammers....
    09-21-2020, 07:52 PM
  • Burn cream
    by CD2
    Drugstore used to carry a white silver cream.
    No longer does.
    Was maybe 10 bucks or so for a little tube.
    Bargain.

    Got...
    09-21-2020, 05:39 PM
  • Colorado surprise. Couple of dads guns.
    by dewman
    So even with all the wrangling being done to screw we 4 sons of my father I got a little lucky. Even though my stepmom is still alive and her 3 sons from...
    09-20-2020, 10:12 PM

Right Rail 3 Ad

Collapse

Footer Ad Widget

Collapse
Working...
X